Tim Cook
Historian, Canadian War Museum

The Great War has often been called the gunner’s war. “The artillery conquers and the infantry occupies,” remarked one French general. That was too simplistic, of course, as infantry tactics developed throughout the war, but the artillery barrage was the key to victory or defeat.

In 1914 and 1915, artillery proved it was the great killer. For those caught in the open, shrapnel and high explosive shells wreacked havoc. Thousands were left rotting on the battlefields. However, artillery guns were vulnerable to small arms fire, and they could be driven away from the front. But the guns were soon firing indirectly from hidden positions several kilometeres to the rear, still causing terrible damage. Soldiers were forced to find safety in trenches, digging beneath the ground to escape the murderous fire.

As trenches were strengthened with barbed wire, deep dugouts, and machine -guns, an enormous weight of fire was needed to smash the enemy defences and support the infantry. But there were not always enough shells in the early years to feed the guns. And so the infantry were killed in the tens of thousands as they attacked undamaged enemy trenches in frontal assaults. As the war lengthened, artillerymen received nearly unlimited supplies of shells through the enormous production of munitions factories. New tactics were also developed to improve the accuracy of the guns.

Artillery shells contained high explosives, shrapnel, and, later in the war, poison gas and smoke. Both the high explosive and shrapnel shells were timed to detonate in the air above a target. High explosive shells blasted holes in the trenches and the concussion alone could kill, as lungs collapsed under the force of the explosion. Shrapnel shells were equally deadly, consisting of more than 300 rounded metal balls that exploded downward in a cone-shaped rain of whirling metal. As well, the casing of the shell was designed to explode outward, creating jagged, uneven shards of steel that tore through flesh.

By 1916, commanders believed that massive artillery shoots, involving hundreds of thousands of shells, would annihilate the enemy defenders. This would allow the infantry to punch a hole through enemy lines and restore mobility on the Western Front.

However, it was often hard to hit, and then destroy, the narrow and well-fortified trenches. The problem also lay in the shell fuses. Earlier types were not sensitive enough to explode on contact, especially with shells tasked to clear barbed wire. As a result, many of the shells exploded in the ground, killing very few of the enemy, leaving the infantry to fight their way through defences-in-depth. By the end of 1916, newer, sensitive fuses that exploded on the slightest contact harnessed the destructive power of the artillery and, equally important to the infantry, cleared barbed wire from in front of enemy trenches.

Tactics again changed during the later phases of the bloody battles of the Somme in the last half of 1916. The gunners would never be able to destroy all of the German defences, and even one machine -gunner could kill hundreds of attacking infantry. Instead, the artillery sought to suppress enemy fire through a “creeping barrage,” and give their own attacking infantry enough time to cross the killing zone of nNo Mman’s Lland.

Gunners fired their shells to create a “creeping” wall of fire that slowly moved forward over the enemy lines at fixed intervals: 50 yards (46 m) every couple of minutes, less for muddy ground, more for open warfare. In effect, it was a screen of fire and explosives. As this moving wall of shrapnel and high explosives chewed up the ground in its path, the infantry were told to “lean into the barrage” and stay as close as possible. Although friendly fire was expected and occurred, the casualties would still be lighter than if the creeping barrage moved off and allowed German machine -gunners, waiting in the safety of deep dugouts, to get to the top of their trenches before the infantry crossed nNo Mman’s lLand.

At the Battle of Vimy Ridge in April 1917, the gunners had perfected the creeping barrage. Yet enemy gunners still took a fearful toll as they laid down their own counter-barrages to catch the follow-on waves of infantry. The enemy guns had to be stopped, or slowed, but it was exceedingly difficult to identify, target, and destroy camouflaged guns several kilometeres away.

Accurate intelligence was essential, and new and refined forms of science aided the gunners. The Canadian Corps was lucky to have Brigadier-General Andrew McNaughton, commander of the counter-battery office for much of the war, who embraced new technology and tactics. A prewar professor at McGill University, he turned to science to save his soldiers lives.

The Canadian Counter Battery Office (CCBO), established in February 1917, gathered intelligence and processed information on the enemy to assist in knocking out his guns. Aerial reconnaissance from the Royal Flying Corps (later Royal Air Force) was of great assistance as airmen photographed the front from great heights. Later in the war, observation aircraft circled the battlefield, passing real-time information to the gunners through letter drops and primitive wireless radio.

As the CCBO developed after April 1917, this information-gathering and target-selection became more sophisticated, with new technology, like sound-ranging and flash-spotting, assisting gunners to find and destroy enemy targets.

Flash-spotting involved the coordination of observers. At least three posts were needed, usually spread out along several kilometeres. When an enemy gun position was spotted by the revealing flash as the shell left the barrel, the observers were telephoned by headquarters to turn their attention to that spot. After studying the flash of the gun, the observers would hit a key that was connected to a lamp at headquarters. From the observers’ bearings, and by triangulating their estimates, enemy guns could be located with high precision.

Sound-ranging worked on a similar principle. Listeners sat two kilometeres behind the line with their microphones. Additional posts were manned well ahead of these positions. As long as there was not more than one shell per second being fired, on hearing the crash of an enemy gun, the forward listening post pressed a key that started an oscillograph, an instrument that recorded on film the sound of the shell in flight as it reached each microphone in turn. The time-intervals between the microphones allowed the CCBO to analyse the information and, if conditions were optimal, pinpoint enemy guns to within twenty-five 25 yards (23 m). All available counter-battery guns would be aimed on that spot to deliver a destructive shoot of 50-100 shells. Chemical shells were also used to kill or force the enemy gunners to wear debilitating respirators that severely affected the rate of fire.

In the last year of the war, artillery had perfected the creeping barrage and was steadily improving its counter-battery work. Further tactical refinement allowed gunners to fire more complicated barrages, like a box barrage. The box barrages set up a wall of fire and explosives around an enemy position —-- usually a trench —-- which effectively isolated it from reinforcements. It allowed assaulting Canadian infantrymen to capture and consolidate a position without fear of immediate counterattack.

By war’s end, 43,914 gunners had served in the Canadian artillery, and 2,565 had lost their lives from disease, injury, and battlefield wounds. They had fired tens of millions of shells, reducing the landscape to a desolate wasteland, and an estimated 60% of all wounds were inflicted by shell fire. The First World War was indeed a gunner’s war.

Selected Bibliography

Cook, Tim. No Place to Run: The Canadian Corps and Gas Warfare in the First World War. Vancouver: University of British Columbia Press, 1999.

McNaughton, A.G.L. “Counter-Battery Work.” Canadian Defence Quarterly 3, 4 (July, 1926).

McNaughton, A.G.L. “The Development of Artillery in the Great War.” Canadian Defence Quarterly 4, 2 (January, 1929).

Nicholson, G.W.L. The Gunners of Canada: The History of the Royal Regiment of the Canadian Artillery, Vol. 1: 1534-1919 Toronto: McClelland & Stewart, 1967.

Rawling, William. Surviving Trench Warfare: Technology and the Canadian Corps, 1914-1918. Toronto: University of Toronto Press, 1992.

Swettenham, John. McNaughton, Volume I. Toronto: The Ryerson Press, 1968.

Phil White
Historian, Canadian War Museum

Introduction

Although the carnage of the First World War was unprecedented, there was nothing truly new about the small arms used during the fighting. The story behind these weapons and their terrible efficiency stem from the tremendous advances in science and technology made throughout the late 19th century.

By 1850, arms factories in Europe and the United States were making the most of advances in metallurgy and mass production, and were capable of manufacturing hundreds of rifles daily. Repeating rifles, which could fire several shots before being re-loaded, were used extensively during the American Civil War (1861-65), as were the first simple multi-barrelled machine guns. More powerful ammunition was available in the 1870s. The American inventor Hiram Maxim introduced the first true machine gun, capable of firing 450 rounds per minute, in 1884. The water-cooled barrel gave Maxim’s machine gun the ability to fire for hours without stopping. By the turn of the century, most European and North American soldiers carried high-powered rifles that could fire 15 shots per minute at an effective range of 800 metres. The days of reloading a single-shot rifle, in the open, five or six times a minute, were long gone. The stage was set for the killing fields that were to come.

Two Rifles

Two late-19th-century inventions, the Lee-Enfield rifle and the Ross rifle, the first Canadian-made military rifle, are central to this story.

In the late 1870s, the British Army accepted Scottish-born Canadian James Paris Lee’s rifle design for trials, ultimately resulting in the adoption of the Lee-Metford rifle, then later the Lee Enfield Mk 1 rifle. It was purchased by Canada and used in the South African War.

Sir Charles Ross designed his straight-pull bolt-action rifle and patented the design in 1897. The bolt mechanism, based on the Austrian Mannlicher rifle, also included Ross’s own innovations. In theory, this type of bolt-action was very easy to use and could be reloaded very quickly. The more quickly a rifle can be re-loaded, the more firepower it provides. Its drawback was a complicated manufacturing process and its fragile loading mechanism. Ross revised his design, introducing it as the Model 1900, then later with an improved bolt mechanism in 1901, both of which were submitted to American trials as a potential service rifle.

After the South African War, Sir Fredrick Borden, Canada’s Minister of Militia and Defence, lobbied unsuccessfully to have the Lee-Enfield rifle built by a British firm in Canada. When the British turned down Borden’s request, the Canadian government turned to Ross and his rifle. After a series of modifications, Canada accepted the design, Ross built a factory at the Citadel in Quebec, and the rifle went into production. In 1904, the Royal North West Mounted Police received 1,000 rifles, the Department of Marine and Fisheries another 500. In the coming years, the rifle underwent continual modifications and developments to suit various requirements, including target shooting by the Canadian team at Bisley, where the Ross excelled. In August 1905, the militia received its first order of 1,000 Ross Mk 2 rifles. By 1911, the Mk 3 had been accepted and was being manufactured for the militia.

Britain tested the Ross rifle between 1900 and 1912, rejecting it because of problems with the design, including a propensity to jam.

The British Army continued to use the Lee-Enfield and in 1903, introduced the Short Magazine Lee-Enfield (S.M.L.E.) into service. The S.M.L.E., a shortened version of the Lee-Enfield Mk I, had been developed as a result of experience gained during the South African War. The design and construction were simple, if not crude, but also robust, functioning under less than ideal conditions.

Ross continued to develop and fine-tune his design, resulting in dozens of variations. Between 1903 and 1915, 419,130 Ross rifles were manufactured, with most going to Canadian troops, and some to Newfoundland and Britain.

The Canadian forces entered the First World War with the Ross rifle, Mk 2, Mk 3, and its subsequent variations. Almost immediately, its shortcomings became evident.

On March 10, 1915 the 1st Canadian Division went into battle at Neuve Chapelle, France. The Canadians were heavily engaged and, to the horror of the soldiers, their Ross rifles began to jam. The reasons for this were numerous: the ammunition provided was often inconsistent in size; muddy conditions allowed dirt to build up in the complicated loading mechanism, and the heat generated by rapid-firing caused the closely machined parts to expand and seize. A design flaw also made the bolt difficult to lock, if it had been assembled improperly, and some bolts were said to have blown back into the user’s face. Canadian soldiers soon began discarding the Ross in favour of the British S.M.L.E. Mk 3*, when they could find them in the field. General E.A.H. Alderson, commander of the 1st Canadian Division, was forced to issue an order banning the use of the S.M.L.E by Canadian troops.

When the Canadians fought at the Second Battle of Ypres, in late April 1915, the Ross failed again. Outnumbered and facing the first gas attack of the war, the Canadians found their rifles jamming. Some reports had them “Clubbing furiously at their seized bolts with trenching tools and boot heels.” By the end of the battle, hundreds had discarded their Ross rifles in favour of the trusted S.M.L.E.

By June 1915, British Field Marshal Sir John French ordered the Canadians under his command to be re-armed with the S.M.L.E. However, the 2nd and 3rd Canadian Divisions that soon arrived in Europe still carried the Ross.

In May 1916, a study into the Ross’s problems confirmed the jamming and recommended modifications to the rifle’s bolt-stops. Earlier tests had reported the Ross worked well with Canadian ammunition made at Dominion Arsenals in Quebec, but this ammunition was in short supply. New, poorly fitted stocks made from improperly seasoned birch were also causing problems as the wood warped and pressed against the metal frames. In light of the report, a few rifles were re-built with 26-inch barrels, trimmed stocks and larger bolt-stops. Although the rifles were reported to have worked “superbly,” soldiers had lost all confidence in them. In mid July, Field Marshal Sir Douglas Haig re-armed Canadians with the S.M.L.E. and the Ross was officially withdrawn from front line service by the end of that year.

By this time Sir Charles Ross was running into other problems. Skilled labourers were finding better work in the United States, machinery ordered in 1914 had yet to arrive, and supplies were increasingly difficult to secure. Ross won a $22,500,000 contract to make one million rifles for Russia, but had to let it go to the United States due to inability to meet his deadline. A second order from Russia was cancelled after the Mk 3 was withdrawn from Canadian service. On March 28, 1917, the Canadian Government expropriated the Ross Rifle Company. Canada’s first and only national rifle had failed as a battlefield weapon.

The Machine Gun

In 1912, the British Army adopted the water-cooled Vickers Mk 1machine gun, an improvement over the 1884 Maxim design, as its standard machine gun. The slightly lighter Vickers, like the Maxim, made use of an ammunition belt, and could fire 450 rounds per minute. Its water-cooled barrel could sustain this fire over very long periods of time, often for hours. Classified as a medium machine gun, the Vickers Mk 1 was used primarily on a tripod from defensive positions. It could be fired directly at a visible target, or indirectly, like artillery, at targets or positions at long range or behind obstacles.

In response to the need to provide quick-moving infantry with machine gun support, light machine guns appeared on the battlefield in 1914. The Lewis, the first light machine gun used by the British and Canadian forces, had been introduced into service with the Belgian army in 1913. It weighed about 18 kg and could be carried “over the top” like a rifle, to give advancing troops added firepower.

Due to a shortage of light machine guns, the British and Canadians also adopted the Hotchkiss machine gun in 1916. The Hotchkiss was based on the French medium machine gun the Mitrailleur Mle. 09, modified for use as a light machine gun. Although lighter than the Lewis, the Hotchkiss was more complicated and was used mainly by the cavalry. The Hotckhkiss remained in service for training and home guard use after the First World War and was not declared obsolete until 1946.

The decisions regarding when and how to deploy, or advance against small arms fire relate to the concept of the ‘beaten zone’ or ‘killing zone’ that existed between the lines, and the time-versus-lead equations; the idea that a storm of bullets and/or artillery shells poured into a given area made the task of ‘advancing to contact’ extremely difficult, if not impossible. This led to obvious challenges: crossing the zone more quickly (tanks) or by stealth (surprise attack, often without pre-shelling); better tactics to bypass resistance (storm troops, combined arms warfare); and heavier bombardments to keep enemy heads down, destroy obstacles, etc; and in the meantime, drove troops into the ground (trenches) to escape slaughter.

Close Combat

Most of the casualties during the war were inflicted by artillery or small arms fire coming from a distance. However, there was still some close and brutal fighting, often as part of larger operations, but particularly during trench raids.

All rifles were fitted with bayonets, which took the form of a long knife or spike that could be attached to the muzzle of the rifle, effectively forming a spear. By the First World War, British, and Canadian soldiers had been training to use bayonets for 200 years and were very efficient in its use. The bayonet also had an enormous psychological impact. Hundreds or thousands of enemy troops running towards you firing their rifles, screaming and brandishing long blades or spikes, was a terrifying and demoralizing sight. Despite the psychological advantage, many officers considered the bayonet perfectly useless, even in the 19th century. Firepower and broken terrain could keep cavalry at bay from c1860 onwards in most battles, thereby removing the bayonet’s one real advantage – warding off cavalry. When fighting in the confined spaces of the trenches, the length of a bayonet fixed to the muzzle of a rifle could be a great disadvantage. To this end, many soldiers equipped themselves with other weapons, both standard and non-standard issue. These weapons were especially important for trench raids.

Usually conducted at night, trench raiding was extremely brutal, tending to resemble medieval warfare. Soldiers made use of pistols, grenades, clubs, axes, morning stars, knives and even sharpened shovels. As a defensive measure, body armour was brought back into use and worn openly by infantry for the first time since the 17th century.

Pistols

Pistols were issued officially to officers and NCOs exclusively, but they were also occasionally picked up or traded by soldiers and used for close fighting.

At the beginning of the First World War, Sam Hughes, Minister of Militia and Defence, ordered 5,000 semi-automatic .45 ACP calibre Colt model 1911 (Government Model) pistols through one of his “Honorary Colonels,” causing a short-lived political scandal. The pistols were issued to non-commissioned officers and made available to officers for purchase, along with some older Colt revolvers left over from the South African War. Canadian officers serving with the Royal Canadian Horse Artillery, or other units assigned to British formations, were issued with Webley revolvers of various marks.

With the forces rapid expansion, the military needed more pistols by mid 1915. Due to shortcomings found with the Colt Model 1911, the government purchased 1,500 Smith & Wesson .455 Hand Ejector Second Model revolvers on August 21, with later orders for 13,000 between 1915 and 1917. Revolvers were considered more reliable in harsh conditions.

Conclusion

Immediately after the ceasefire of November 11, 1918, many First World War small arms developments were shelved. Advances had been made in designing lighter, more efficient machine guns and submachine guns, but, in the debt-ridden postwar years the last thing most governments wanted to spend money on was small arms.

The Department of Militia and Defence was now faced with the disposal of the unwanted Ross rifles. Some 120,000 Mk 2 and Mk 3 rifles were taken overseas and turned over to the British, and 20,000 were sold to the United States for training. Of the rifles sent overseas, 9,334 were later returned to Canada. The Ross continued in use as a sniper rifle throughout the war, and well into the Second World War, making use of its initial design as a sporting and target rifle. Many Ross rifles were also re-issued during the Second World War for training and Home Guard use and eventually made their way into the hands of the armies of China, Chile, the Baltic states, Spain, New Zealand, Holland, India, Indonesia and the Soviet Union.

The S.M.L.E. remained in service well into the Second World War and was replaced in 1942 by the Lee-Enfield No. 4. James Paris Lee’s basic rifle design is still in limited service with the Canadian Forces in the 21st century with the Canadian Rangers and Cadets.

The machine gun continues to be a vital part of the arsenals of all armies. The Vickers machine gun was used in the Second World War, the Korean War, and was not officially declared obsolete until the 1960s. The Lewis gun saw limited service in the Canadian Army during the Second World War, notably at Hong Kong.

The bayonet is stilled issued and used as a standard attachment to most military rifles worldwide.

The small arms designs that were rooted in the late 19th century and used during the First World War evolved very little throughout the first half of the 20th century. Although infantry tactics evolved considerably and the casualty figures of the First World War seem incomprehensible today, killing over open sights remains the foot soldier’s basic role.

Selected Bibliography

Edgecombe, David W. Defending the Dominion, Canadian Military Rifles 1855-1955. Ottawa: Service Publications, 2003.

---. Small Arms of the World: A Basic Manual of Small Arms. 12th rev. ed. Harrisburg, PA: Stackpole Books, 1983.

Ezell, Edward C. Handguns of the World: Military Revolvers and Self-Loaders from 1870-1945. Harrisburg, PA: Stackpole Books, 1981.

Hogg, Ian V. The Illustrated Encyclopedia of Firearms. London: New Burlington Books, 1978.

---. Military Small Arms of the 20th Century. 7th ed. Iola: Krause Publications, 2000.

Law, Clive M. Canadian Military Handguns, 1855-1985. Bloomfield, ON: Museum Restoration Services, 1994.

---. Without Warning: Canadian Sniper Equipment in the 20th Century. Ottawa: Service Publications, 2004.

Maze, Robert J. Howdah to High Power: A Century of British Breechloading Service Pistols (1867-1967). Tucson: Excalibur Publications, 2002.

Meek, John F. Over the Top: The Canadian Infantry in the First World War. Orangeville, ON: John F. Meek, 1971.

Morton, Desmond. A Military History of Canada. Edmonton: Hurtig Publishers, 1985

Nelson, Thomas B. The World's Submachine Guns. Cologne, Germany: International Small Arms Publishers, 1963.

Phillips, Roger. The Ross Rifle Story. Sydney, NS: John A. Chadwick, 1984.

Rawling, Bill. Surviving Trench Warfare: Technology and the Canadian Corps 1914-1918. Toronto: University of Toronto Press, 1992.

Saunders, Anthony. Weapons of the Trench War, 1914-1918. Phoenix Mill: Alan Sutton, 1999

Skennerton, Ian D. The British Service Lee, Lee-Metford and Lee-Enfield Rifles and Carbines 1880-1980. London: Arms and Armour Press, 1982.

---. The Lee-Enfield Story. Piqua: I.D.S.A. Books, 1993.

Michel Litalien
Historian

Front-line soldiers cannot fight effectively unless they are fed, clothed and equipped properly and have sufficient ammunition and gear to face the enemy. And they cannot hold their lines for long if they are not supported by solid military logistics.

Canadian military logistics is a dimension of the history of the Canadian Expeditionary Force (CEF) that is often overlooked. Yet just a few days after Canada’s entry into the First World War, it was obvious that there was no way of ignoring it. When huge numbers of military and civilian volunteers showed up at Valcartier, near Quebec City, in August 1914, logistical support services, which had only recently been established, were soon put to the test. Clothing and equipping the members of the first contingent turned out to be a real headache. Manufacturers had to be found and contracts drawn up in a hurry for the production of uniforms, boots, belts, weapons, vehicles and so on. From a logistical standpoint, mobilizing the first contingent destined for Europe was a nightmare.

Throughout the Great War, the Canadian Expeditionary Force’s logistical support system was an immense, complex operation. Of all the support services, the Canadian Army Service Corps (CASC) was the most diversified. Its main responsibilities were transporting combat troops, delivering equipment and materials, and providing the troops with fresh supplies. In addition to these essential tasks, the CASC also evacuated the wounded (ambulance drivers belonged to the corps), salvaged equipment that had been captured from the enemy or left behind on the battlefield and delivered mail. The CASC worked closely with the Canadian Ordnance Corps, the Canadian Army Medical Corps, and the Canadian Artillery Corps for the transportation of specialized ordnance.

The CASC operated from seaports located hundreds of kilometres from the battlefield, all the way to just behind the front lines. Its replenishment system could supply not only small groups of just a few men but also formations the size of an infantry battalion (approximately 1,000 men).

Resupplying front-line units was a multistep process. From ports and depots, supplies were first taken by railway to railheads. From there, CASC units were responsible for moving the supplies by truck or light railway to supply dumps. These operations took place in the third line of supply. Thanks to their small size, light railways could run and reach areas closer to the front lines more easily. It was also harder for enemy artillery to pinpoint them. The administrative area behind the front lines was crisscrossed by light rail lines that were built and maintained by Canadian railway troops.

From the supply dumps, the CASC’s divisional train and ammunition supply column, both of which were horse-drawn, were responsible for bringing supplies closer to the front lines, to their respective divisions or individual units. This was the second line of supply.

Lastly, operations to supply front-line units constituted the first line of supply. These units had to come back to the rear to get their own supplies of gear, ammunition, weapons, technical and communications equipment, water, medication and food. These supply expeditions were carried out chiefly at night so that the soldiers could not be seen by the enemy. But assigning combat troops to this task meant that a battalion’s defensive positions at the front would be short of manpower for a time and so vulnerable to enemy attack.

Toward the end of the war, however, a Canadian officer from Montreal proposed using the tumpline system — the method that Canada’s aboriginal people and coureurs de bois had used to carry large loads on foot. Before the introduction of this system, infantryman had to carry supplies in their arms, thus limiting the quantity of materials due to their size and weight. The tumpline system, which involved the use of a head strap, allowed the soldiers to carry more weight and freed up their arms, thus giving them more freedom of movement. With this system, each soldier was able to transport a greater quantity of supplies and so fewer men were required for the job, leaving more troops to ensure the defence of the front lines.

Besides regularly providing drivers and vehicles to other units, the CASC also maintained and repaired its vehicles. It also had to make sure that the troops were fed, which meant that fresh and hard rations had to be allocated and distributed properly; its military cooks oversaw the operation of field bakeries and butcheries.

The CASC was not the only logistical support corps to play a key role in the CEF. The Canadian Ordnance Corps was responsible for procuring, storing and distributing uniforms, boots, equipment, weapons, ammunition and shells to combat troops. Specialized supply depots, located in the second line of supply, helped ensure more effective distribution.

The Canadian Ordnance Corps’ other major role was to maintain equipment in the field. The repairmen in the specialized ordnance mobile workshops could get closer to the deployed units and repair their weapons, both light and heavy, as well as their equipment. If the mobile workshops were not able to do the repairs on site, the weapons and equipment were shipped to heavy or stationary workshops at the rear, where virtually anything could be reassembled or rebuilt. The small detachments of the Ordnance Corps worked closely with the various units of the Army Service Corps.

Despite the gradual mechanization of the war, horses remained a vital component of the CEF. The cavalry, the artillery and, of course, the Army Service Corps used huge numbers of horses right up to the end of the war. At one point, Canadians were using as many as 24,000 horses and mules in their overseas operations. Horses could often manage in places where motorized vehicles could make no headway! Inevitably, some horses suffered injuries or fell ill. The Canadian Veterinary Corps operated mobile sections to take care of horses; it also ran veterinary hospitals for horses, advanced remount depots and specialized basic provisions depots.

Other logistical support services also played a crucial role in enabling combat troops to get on with their job. The Canadian Postal Corps, for instance, helped maintain the morale of soldiers at the front, at the rear and also those convalescing in hospitals. Army chaplains, who constituted the smallest organized support group, provided religious services to Canadian soldiers of different faiths and offered moral support at difficult times. Lastly, despite the enemy’s efforts to maintain a naval blockade by submarines, the Canadian Forestry Corps ensured that Great Britain, France and the Canadian Expeditionary Force obtained all the timber they needed to carry out their military operations.

Thousands of men served in these various organizations. The Army Service Corps, for example, counted over 17,000 officers and non-commissioned soldiers in its organization. Even if these units were not combat troops, many of them, including the Army Service Corps, played important roles in all military actions. One hundred and four members of the CASC were killed, and 363 were wounded.


Selected Bibliography

Brown, Ian Malcolm. British Logistics on the Western Front, 1914-1919. Westport: Praeger Publishers, 1998.

Canadian Army Service Corps, 2nd Divisional Train: Record of Service of Officers, 1914-1919. Brian Pontifex, comp. Toronto: Carswell, 1920.

Davies, W.J.K. Light Railways of the First World War: A History of Tactical Rail Communications on the British Fronts, 1914-18. Newton Abbot, UK: David & Charles, 1967.

French, Cecil. A History of the Canadian Army Veterinary Corps in the Great World War, 1914-1919. C.A.V. Barker and Ian K. Barker, eds. Guelph: Crest Books, 1999.

Jackson, H.M. The 127th Battalion, CEF; 2nd Battalion, Canadian Railway Troops. Montreal: Industrial Shops for the Deaf, 1957?.

Johnston, James Robert. Riding into War: The Memoir of a Horse Transport Driver, 1916-1919. Fredericton: Goose Lane Editions and The New Brunswick Military Heritage Project, 2004.

Love, David W. “A Call to Arms”: The Organization and Administration of Canada’s Military in World War One. Calgary: Bunker To Bunker Books, 1999.

Phelan, Frederick Ross. “Army Supplies in the Forward Area and the Tumpline System: A First World War Canadian Logistical Innovation.” Canadian Military History 9, no 1 (Winter 2000): 31-45 [reprinted from the article published in the Canadian Defence Quarterly in October 1928].

To the Thunderer his Arms: The Royal Canadian Ordnance Corps. William F. Rannie, ed. Lincoln, ON: W.F. Rannie, 1984.

Warren, Arnold. Wait for the Waggon: The Story of the Royal Canadian Army Service Corps. Toronto: McClelland and Stewart, 1961.

Although by August 13 1918 the Allied offensive had been definitely checked, the German leaders could no longer doubt that the initiative had passed from their hands. On that date, at a conference held at Spa with Field-Marshal von Hindenburg, Reichschancellor Count von Hertling and the Foreign Secretary, Admiral von Hintze, in attendance, Ludendorff, while opposing any voluntary surrender of ground, admitted "that it was no longer possible to force the enemy to sue for peace by an offensive". Since the defensive alone could hardly achieve that object, the war would have to be ended by diplomatic means. Hindenburg, on the other hand, derived some comfort from the fact that "the enemy had once more failed to extract all possible advantages from his great initial successes" and that German armies were "still standing deep in the enemy's country." Next day, at a Crown Council presided over by the Kaiser, His Majesty ordered peace negotiations to be opened through the King of Spain or the Queen of the Netherlands.187 It was also about this time that orders were issued calling off large-scale air attacks planned against the British and French capitals by German bombers using thousands of one-kilogram incendiary bombs. While it was proclaimed to the world that these cities were being spared on humanitarian grounds, there seems little doubt that the inevitability of a German defeat was the main reason for the cancellation of the attacks. Throughout the war British and French planes dropped some 14,000 bombs on German soil. A British plan to attack Berlin, however, failed to materialize owing to insufficient aircraft capable of such a mission.

In the meantime Allied plans on the Western Front were undergoing revision. As early as the evening of August 11, as German resistance stiffened, Marshal Foch had shown himself willing to modify objectives and consider alternatives to further offensive operations on the Amiens front. At that time large-scale operations were due to be resumed on the 15th. But on the 13th General Debeney asked for and received a day's postponement of the assault by his army; and next morning General Rawlinson was given the same extra time in which to complete his preparations. Sir Douglas Haig has revealed in his diary that he shared Rawlinson's misgivings about attacking the well-prepared Roye-Chaulnes defences and that he was resolved that the French First and British Fourth Armies should merely "keep up pressure on that front" in order to hold the enemy's attention, while he prepared to strike elsewhere with the British First and Third
Armies.

There is no doubt that Rawlinson was considerably influenced by representations made to him by General Currie, upon whose forces the burden of a major share of a renewed offensive must fall. At a meeting on the morning of August 14 the Army Commander showed Haig a letter (accompanied by air photographs taken the previous day of the German positions) in which Currie set forth the arguments against renewing an operation which would "cost a great many casualties" without obtaining adequate results. He suggested that if the attack were found to be absolutely necessary it should be postponed in order to allow time to "recover the element of surprise." He recommended that an alternative, and better, course would be to withdraw the Canadian Corps from the line, and after resting it for a few days employ it on the Arras front in a surprise attack in the direction of Bapaume. An advance in this sector coupled with an attack by the French from their present line, might well force the enemy to abandon his positions west of the Somme without the necessity of a frontal assault.

This last suggestion was in keeping with Haig's own ideas. An exchange of letters with Foch on the 14th brought no agreement about postponing operations at the Somme, and that evening a telegram from the Generalissimo asked Haig "once more to maintain the date already set." The Field Marshal, however, had made up his mind to limit the Somme attack to a series of set stages, and on the afternoon of the 15th he pressed his arguments at Foch's advanced headquarters at Sarcus (twenty miles south-west of Amiens). "I spoke to Foch quite straightly", his diary records, "and let him know that I was responsible to my Government and fellow citizens for the handling of the British forces." Foch's resistance had already been weakened when he learned from General Debeney that morning that the projected attack on Roye "would certainly be difficult", and even if mounted would leave the French forces too weak to maintain it. "I definitely came around to the opinion of Field-Marshal Sir Douglas Haig", he wrote in his Memoirs, and he agreed that the Amiens offensive should not be pressed.

A new operation order issued by British G.H.Q. directed the Third Army, which was holding a nineteen-mile front north of Albert, without delay to "press the enemy back energetically in the direction of Bapaume"; the Fourth Army while continuing its preparations for an attack would be prepared to follow up any German withdrawal towards the Somme. Farther north the First Army would take advantage of any German retirement to exert pressure south-eastward from the Arras sector; under favourable conditions, it would attack Monchy-le-Preux and Orange Hill.

In a letter confirming his acceptance of Haig's proposals Marshal Foch made it clear that he was depending on the British operations to be developed with sufficient impetus to ensure a resumption of the thrust south of the Somme. He went on to thank Sir Douglas for his cooperation, which had completely freed the Amiens area and the Paris-Amiens railway. For an offensive north of the Aisne he was now going to transfer the French First Army from Haig's command back to Pétain's group of armies. Accordingly the Franco-British boundary was shifted northward to the Amiens-Chaulnes railway, and the relief of the Canadian Corps by French troops began on 19 August.

On the night of August 19-20 the 2nd Canadian Division began moving northward by bus and train to rejoin the First Army in the Arras sector, followed the next night by the 3rd Division. A number of days were to elapse before the 1st and 4th Divisions made the move. General Currie closed his Headquarters at Dury on the 22nd. During the day he called on a number of senior commanders and had the satisfaction of being told by General Byng that the Canadian performance at Amiens was "the finest operation of the war".

Adapted and used with permission from Nicholson, G. W. L., Canadian Expeditionary Force 1914-1919. Ottawa: Queen’s Printer, 1964, p.396-398.

Subject Area: English, Media Studies, History
Grade Level: Secondary 9-12
Time Allowance: 45 minutes
Films: Canadians Advance Near Cambrai 2, Salvage Work on the Canadian Front
Summary: Students create a film about WWI machine guns by choosing film excerpts and writing poetry that evokes the images and sounds of the guns.

Background:

The founder of the National Film Board, John Grierson, made a remarkable film in the 1930s called Night Mail. It showed how a letter written in London, England, to someone in Scotland, was sorted overnight on the train and delivered the next day. A poem about the sorting of the mail was composed especially for the movie and read to great effect as the film played. The poem captured the rhythm of a steam train:

This is the Night Mail crossing the border,
Bringing the cheque and the postal order,
Letters for the rich, letters for the poor,
The shop at the corner and the girl next door….
Letters of thanks, letters from banks,
Letters of joy from the girl and the boy,
Receipted bills and invitations
To inspect new stock or visit relations.

(See the full text at: www.newearth.demon.co.uk/poems/lyric206.htm)

Your Task:

In the same way that John Grierson captured the spirit of the Night Mail through film and poetry, write a poem and choose film excerpts from Canadians Advance Near Cambrai 2 and Salvage Work on the Canadian Front to capture the spirit of the machine guns of World War I. Machine guns, a relatively new invention at the time, were so prevalent and so destructive that the First World War is sometimes called “The Machine Gun War.”
• Either choose the film clips to match the poetry or write the poetry to match the film clips.
• Use poetic techniques such as:
Onomatopoeia (the sound and the word are the same)
Similes (comparisons using like or as)
Metaphors (comparisons that state something as something else: “guns are swords of death”)
Rhyme (words that end in similar sounds)
Alliteration (repetition of consonants: guns, groaned, grandly)
• Try to capture the mood of machine guns.
• Capture a sense of this period using words and phrases of the time, such as “going over the top” or “trench war.”



Title of your film: _______________________________________

Description of film excerpts













Your poem